Give the procedure to measure the mass of a solid using digital balance
Digital balace
Answer variants:
Carefully place a solid object and note the reading, which is the mass of the solid object
If it is showing zero change the reading
If not showing zero, press the tare button to set it as zero.
Place a clean watch glass on the balance.
Observe the initial reading, the balance should show \(10g\)
Switch on the digital weighing balace
Observe the initial reading, it should show zero as the initial value
Press tare to reset the balace to zero, to ignore the mass of watch glass
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Reference:
https://upload.wikimedia.org/wikipedia/commons/c/c0/Notated_Analytical_Balance.jpg
https://www.stninstruments.com/products/analytical-balance-60g-0-1mg-non-sc